Expo Online: Nov. 17-19, 2020

10
Apr

IMO Compliant

Safeguard Technology, Inc.

www.safeguard-technology.com

IMO Compliant

The Only Anti-Slip Products that Comply with IMO Resolutions Cited in the ABS Rules for Building and Classing Offshore Drilling Units and Marine Vessels
Safeguard Hi-Traction Anti-Slip Step Covers for Marine Vessels

Inside and out, your vessel must be safe for the people aboard. That’s why regulations specify that indoor FRP grating must meet acceptable levels of flame spread and smoke generation/toxicity. Regulators have extended this requirement to include the use of IMO Compliant Anti-Slip Step Covers to prevent slips-and-falls on marine vessels.

Safeguard® Hi-Traction® Anti-Slip Covers for steps and walkways with steel base material have been tested to the ISO 5659-2 protocol and found to comply with the two applicable IMO Resolutions. Installed over compliant grating, your crew will not only be protected against slips-and-falls but also from flames and toxic smoke in case of a fire.

The two relevant IMO Resolutions:
• Section 5.5.2: IMO Resolution A.653(16) – Recommendations on Improved Fire Test Procedures (Flame Spread)
• Section 5.7.2: IMO Resolution MSC.61(67), Part 2 Smoke and Toxicity Test – IMO Fire Test Procedures Code (FTPC)

According to ABS Rules for Building and Classing Mobile Offshore Drilling Units and Marine Vessels (2017 – see p. 45), all FRP gratings fitted in enclosed areas must have low flame spread characteristics as proven by either an ASTM E-84 test result with flame spread rating of 20 or less or tested to IMO Resolution A.653(16).
Additionally, any FRP grating within accommodation, service, and control spaces must have low smoke characteristics as determined by the approved test procedures in IMO Resolution MSC.61(67), Part 2 Smoke and Toxicity Test- IMO Fire Test Procedures Code (FTPC). Low smoke characteristics refer to the amount of smoke generated when the material catches fire and also to the toxicity of the smoke. Safeguard’s IMO Compliant Anti-Slip Step Covers have been found to meet the standards.

Keep your crew as safe as possible – use Safeguard® Hi-Traction® Anti-Slip Covers with steel base material to prevent injuries on steps and walkways. Rest assured that workers in enclosed areas will have ample time to evacuate in case of fire.

Connect with us on social media

Twitter: @SafeguardTech
Facebook: https://www.facebook.com/Safeguard-Technology-119579388065523/
Linkedin: https://www.linkedin.com/company/safeguard-technology-inc-/

© Diversified Communications. All rights reserved.